Carbon Fiber Release Agent Water Based Environmentally Friendly Mold release
Application Field:
It is a lubricant and release system designed for carbon fiber industry.
It has shown excellent performance in releasing carbon parts.
It can be diluted with solvent.
Advantages:
- Does not transfer to the product parts.
- Low odour
- No knit lines.
- Minimal build-up on mold
- Excellent surface
Application:
The mold should be thoroughly cleaned.
Mold cleaning and release agent application should be performed in a well ventilated area.
1. Apply Lubekote release agent to clean, dry cotton cloth.
2. Gently wipe over mold surface covering an area of approximately 0,5 m². Vigorous rubbing or polishing is not required.
3. Repeat steps 1 and 2 on the adjacent area. Ensure a good overlap with the previous area to provide complete coverage
4. Repeat until mold is completely coated.
5. When dry, allow a further 15 minutes between coats for the film to cure.
6. Repeat Steps 1- 5 above for a further 3 coats (4 in total).
7. When dry, allow final film to cure for at least 30 minutes at room temperature before molding. Allowing a longer cure or heat curing (e.g. 15 min. at 60 °C) will improve film durability
Reapply one coat of Lubekote release agent in the same way as described above when release becomes hesitant.
Handling precautions:
For industrial use only.
| Application | Product | Advantages |
| Bicycle frame | Lubekote 9511/9308 | volatile fast, release agent good less fouling, cost-effective |
| Racket/helmet | Lubekote 9072/9071 | semi-permanent, fast volatilization, good brightness, no fouling, post process |
| Snowboard/fishing rod | Lubekote 9129A/9125A | water-based easy to operate, mold rust, environmental protection, harmless to people |
Shanghai LoreChem Co., Ltd. was established in 2008. It is a high-tech enterprise which is dedicated to serve releasing products which involve semi-permanent release agent, anti-sticking, surface lubrication and thermal reactive adhesive. Shanghai LoreChem has been improving product quality for 15 years. The releasing products are mainly applied in rubber, polyurethane and composite industry. The brand of Lubekote for release agent and Thinkbond for adhesive have been registered in China. Both of them are well known in the industry.
Shanghai LoreChem 's business is all over the domestic and foreign high-end production enterprises by providing professional technical solutions and services. The company's long-term goal is to become one of the best suppliers of release agent in Asia.
Product Tags:
|
|
Carbon Parts Composite Release Agent , Water Based Carbon Fiber Mold Release Agent Images
|
